You may also like
The Dragon Kayak motor mounting bracket is the best bracket in Australia.
Suitable for mounting electric and petrol trolling motors either right or left hand side.
Our own design, these mounts are not available anywhere else in Australia.
Made from sturdy aluminium tubing, marine grade stainless centre pins and 3D printed Nylon mounting block and hinges.
The unique design allows you to mount the bracket to your kayak utilising the two rear rod holders for a snug and secure fit. This motor mounts also double as rod holders and can fit just about any kayak on the Australian market.
Tested up to 72lbs of thrust these motor mount out preform all other side mount motor brackets on the market!
Distance between poles that sit in the rod holders is 31-58cm. The diameter of the poles is 34mm.
Kayak Motor - 4 stroke petrol 1.5HP
This 1.5 hp 4 stroke kayak motor is fantastic for any size kayaks up to 5m in length. Its a great little petrol motor and is a perfect fit for any fishing kayaks.
Simple and easy to install and mounts directly to a kayak mounting bracket .
Many people prefer the 4 stroke kayak motor for its quietness, smooth running and economy.
If you are looking for a small boat motor for fishing you will want an engine that’s light weight, quiet and clean. This little 1.5 hp 4 Stroke Outboard Motor will burble away at idle and then, when accelerated enough to engage the clutch, is still a quiet little engine, even when pushing you along very briskly.
It will run for over an hour and a quarter on a tank of fuel but a 5 litre jerry can of petrol is easy to carry and then you will have all the range you need for a days fishing. No expensive deep cycle battery woes with this little outboard kayak motor.
Technical date of the outboard motor:
Engine type: |
Single cylinder, 4 stroke, air-cooled |
Engine model: |
1E40F |
Displacement: |
37.68cc |
Bore x stroke: |
40x30mm |
Max. Power: |
1.0kw/6500rpm |
Start system: |
Recoil start (manual start) |
Fuel tank capacity: |
0.65L |
Engine oil capacity: |
0.80L |
Idle speed: |
6500rpm |
Ignition system: |
CDI |
Gear ratio: |
2.08(27/13) |
Propeller diameter: |
18.0cm |
Running speed: |
15--18km/h |
The ultimate Kayak Hoist/Ceiling Rack
- The strongest kayak hoist/ceiling rack on the market
- Maximize space and hang it from the roof,
- No more tripping or stepping over your kayak
- 2X Steel Plates Including Double Rope Pulley System For Fixing To Your Roof/Ceiling
- 2X Plastic Coated Metal Hooks For Attachment To Your Kayak/Canoe
- 16 Metres Of Rope
- 10X Fitting Screws
- 1X Cleat To Tie Off The Rope!
- Colour: Black
- Convenient pulley system to allow you to move the kayak up and down.
- Rope length of kayak hoist: 16m.
- Maximum weight capacity: 56.6kg .
The ultimate Kayak Roof Rack
- Heavy duty construction with a maximum load capacity of 75kg
- Will fit most factory or aftermarket round,square,oval and flat crossbars
- 2X silver aluminium Frames Which Carries 1 Kayak/Canoe
- Size Length 380mm x Height 490mm x Width 160mm
- Multi-Angle Foldable Arms
- Tube Size: 22.2 X 2.0mm Powder Coated
- Max Load Capacity: 75kg
- Bolts And Nuts To Secure To Your Existing Roof Rack
- Maximises Space On Your Roof So You Can Take All You Need And More With You
- You Can Fit This Onto Your Roof Rack In Minutes
- Can be folded down when not in use so you can get into most car parks without removal
Installs in minutes and can be folded down when not in use
This kayak roof rack retails in stores for $189.